Hattons Originals SECR P Class Digital Fitting Guide
DCC fitting your P Class 0-6-0T is very quick and simple, follow our video, or read the step-by step guide to learn how to fit yours!
You will need:
Step 1: Detach the body
Unscrew the four body holding screws; there are two at each end of the P Class.
Step 2: Remove the body
Separate the body from the chassis.
Step 3: Remove the Blanking Plate
Remove the blanking plate from the PCB. This can be found at the side of the chassis, but can move upward for easier access.
Step 4: Prepare the decoder
Unbox your decoder. We recommend the Hattons DCR-6PIN-Direct
Step 5: Install the Decoder
Insert the decoder into the PCB, where you removed the blanking plate earlier. Make sure to put the PCB back into its original position once the decoder is installed.
You may want to test the chassis on DCC before continuing, to make sure it is working correctly.
Step 6: Replace the body
Replace the body on the chassis, making sure the decoder fits correctly inside.
Step 7: Secure the body
Reinsert all four screws to secure the body onto your locomotive.
Congratulations! Your DCC fitted P Class is now ready to use!
Find out more about the P Class here